Sheet vinyl is the practical, affordable floor for kitchens, bathrooms, utility rooms and anywhere that gets genuinely wet. Laid in one continuous piece with as few joins as possible, it gives you a surface that water simply cannot get through, at a price that is hard to beat.
We supply and fit cushioned vinyl for comfort underfoot at home, and slip-resistant safety vinyl for commercial kitchens, bathrooms, care homes and anywhere that has to meet a wet slip rating. Both are fitted across Preston, Chorley, Blackburn and the rest of Lancashire.
Cushioned vinyl has a foam backing that makes it softer, warmer and quieter to stand on, which is why it suits kitchens and family bathrooms. Safety vinyl swaps that comfort for aggregate embedded through the wear layer, giving a sustained slip resistance that does not wear away as the floor ages.
Safety flooring is what we fit in commercial kitchens, wet rooms, changing areas and care environments where a wet floor is a certainty rather than an accident. If that is your setting, our commercial flooring page covers how we schedule the work around a trading business.
Where a room needs to be fully waterproof, we hot-weld the seams and cove the vinyl up the wall so there is no join at floor level for water to find. If you like the look of vinyl but want a plank or tile format, LVT gives you the same waterproof performance with a more convincing wood or stone finish.
No, though the words get used interchangeably. Linoleum is a natural product made from linseed oil and cork dust, while vinyl is a synthetic PVC sheet. Almost everything sold as lino today is actually vinyl, which is more water resistant and easier to look after.
Yes, and it is one of the best choices for both. In a standard bathroom we lay it as a single sheet with no joins wherever the room allows. In a wet room we hot-weld any seams and cove the vinyl up the wall so there is no floor-level join at all, which is what makes the room genuinely tankable.
Safety flooring is vinyl with quartz or aluminium oxide aggregate dispersed through the whole wear layer, giving reliable grip in wet conditions. Because the aggregate runs all the way through rather than sitting on the surface, the slip resistance lasts the life of the floor. It is specified by rating, usually R10 or R11, and it is standard in commercial kitchens and care settings.
Yes, more than for any other floor type. Vinyl is thin and flexible, so every lump, screw head and dip underneath will read through and eventually wear through. We latex-level concrete or overlay timber with plywood before fitting, and that preparation is quoted as part of the job.
Domestic cushioned vinyl typically gives eight to fifteen years, and commercial safety flooring often lasts longer because the wear layer is thicker. The usual reason a vinyl floor fails early is a poorly prepared subfloor rather than the vinyl itself.
It can, provided the tiles are sound and we fill the grout lines first. If the grout lines are left, they will show as a grid through the vinyl within months. Where tiles are loose or badly laid, taking them up and levelling gives a much better result.
Cushioned vinyl is noticeably warmer than tile or stone thanks to its foam backing, though not as warm as carpet. It also works well over underfloor heating, which solves the problem entirely. Safety flooring is firmer and colder, since comfort is traded for grip.
Yes, both cushioned and safety vinyl are suitable over underfloor heating as long as the floor surface temperature stays within the manufacturer's limit, normally 27°C. The heating needs commissioning and then turning off for a period before and after fitting so the adhesive cures properly.
Sweep or vacuum, then mop with a pH-neutral cleaner. Avoid abrasive pads, solvent cleaners and steam mops, all of which damage the wear layer or the adhesive. Safety flooring occasionally needs a stiffer brush, because the aggregate that gives it grip also holds onto dirt.
Yes, we fit safety and contract vinyl for kitchens, cafés, salons, surgeries, care homes and schools across Lancashire, and we work evenings and weekends where a business cannot close. See commercial flooring for how we handle that.
We fit vinyl flooring throughout Central Lancashire, including Preston, Longridge, Chorley, Leyland, Bamber Bridge, Blackburn, Kirkham and Lytham. The full list is on our areas we cover page.
contact
Tell us which rooms you are thinking about and we will bring the samples to you, measure up, and put one written price in your hand with fitting included.
Covering Preston, Chorley, Blackburn and across Lancashire