Porcelain and ceramic floor tiles give you the hardest, most durable surface available, and they are the right answer for hallways, kitchens, boot rooms and anywhere that takes wet boots and heavy traffic all year round.
We also do the work that goes underneath every other floor we fit. Latex levelling, screeding, plywood overlay and damp-proof membranes are what turn an uneven subfloor into a base that LVT, vinyl or wood can be laid on without telegraphing every dip.
Nearly every flooring failure we get called out to look at is a subfloor problem, not a product problem. Tiles crack because there is movement underneath. Vinyl wears through in a line because a screw head was left proud. LVT rocks because the screed was never flat to begin with.
Getting that base right is unglamorous and it costs money before anything visible has been achieved, which is exactly why it gets skipped. We quote for it honestly at the measure rather than discovering it on fitting day.
If you want the look of stone with less weight, less cost and a warmer surface underfoot, marble-effect porcelain and veined LVT get remarkably close. We are happy to price both so you can compare them properly.
Latex levelling compound is a self-smoothing liquid poured over a subfloor to fill dips and create a flat, even surface. It is the standard preparation before vinyl, LVT and tiling on concrete. It typically cures enough to walk on within a few hours and to fit on within a day.
Usually, yes. Floorboards move, flex and have gaps between them, all of which show through thin floor coverings. Overlaying with 6mm plywood, screwed down at close centres, gives a stable and flat base. Only thick engineered wood can generally go straight onto boards.
Sometimes, if the existing tiles are firmly bonded, flat and the extra height is acceptable at doorways. More often it is better to take them up, because tiling over a floor that is already failing simply moves the problem up a layer. We check for hollow-sounding tiles before advising.
You do not need it, but tiles are cold underfoot and it makes a real difference in a kitchen or bathroom. Electric mat systems are straightforward to install as part of a tiling job and add relatively little to the cost. Retrofitting later means lifting the floor again.
Porcelain is fired at a higher temperature, making it denser, harder and far less absorbent, which is why it suits floors and wet areas. Ceramic is softer and cheaper and is better kept to walls. For any floor that will take real traffic, porcelain is the sensible choice.
Normally about 24 hours before light foot traffic and 48 to 72 hours before heavy use or moving furniture back, depending on the adhesive and the room temperature. Grouting is usually done the day after tiling. We will give you specific timings for your job.
Yes, we lay both traditional sand-and-cement screed and flowing liquid screeds depending on the depth and the timescale. Liquid screed goes down faster and finishes flatter, but takes longer to dry before a floor can go on top. The right choice depends on how quickly you need the room back.
A damp-proof membrane is a liquid or sheet barrier that stops moisture rising out of a concrete slab into your new floor. Older properties without an existing DPM almost always need one, and skipping it will lift adhesive, cup wood and blow vinyl. We test the slab before deciding.
Not if the base is right. Cracks come from movement — a flexing timber floor, a slab that is still curing, or missing expansion joints in a large area. Using a flexible adhesive and grout and preparing the base properly is what prevents it.
Yes, and it is included in the quote where it is needed. It is dusty, noisy work and we sheet up and extract at source, but it is worth knowing in advance that it is the least pleasant day of the job. We take all the debris away with us.
We tile and prepare floors across Preston, Longridge, Chorley, Leyland, Bamber Bridge, Blackburn, Kirkham and the surrounding Lancashire villages. Our areas we cover page has the full list.
contact
Tell us which rooms you are thinking about and we will bring the samples to you, measure up, and put one written price in your hand with fitting included.
Covering Preston, Chorley, Blackburn and across Lancashire